Chosen Solution When I position the bottle and push on it the lever does not move. Make sure the bottle is inserted correctly. The bottle should be inserted and then pushed back, it does not screw in. Also, the nozzle tab may be in the incorrect starting position. The tab should start angled away from the bottle.
Chosen Solution Since I dropped my DPM from about five inches, the screen is frozen. When I turn it off and on the device starts with the same screen. I switched the BA-slider and could listen to my recordings, so I believe the problem is caused by the display, right? As you already figured out there is not much of an uncertainty that the source of your problem is the display....
Chosen Solution I am trying to replace the thumb-stick module on my Xbox one elite controller, because it started to drift. But, the solder on the thumb-sticks is not the same kind of solder as the wires that connect the rumblers to the controller. The solder is much different and does not come off with my soldering iron. I need major help. @roseretro not quite sure where you see a difference....
Chosen Solution My GF bought this version Galaxy S6 Edge+ Gold (Unlocked). Am seeing where it’s a 928G, but in looking for a digitizer replacement I am seeing 928F/928A/928P/928T but not able to find the 928G. Can anyone say if any of these other model variations are compatible as I believe the touch sensor may be different in a few. @techguyjm, duanemunroe2000 , They appear to be generic, it looks like they all start with G928 (perhaps Global)then ad Initial for carrier/seller....
Chosen Solution The buttons on my controller are always sticking and stop working in the middle of a game. What could be causing them to do this? The button on the controller might be stick due to dirtiness, malfunction, or broken buttons. As a first step, try unplugging the controller and plug it back in. If that doesn’t work follow the troubleshooting steps and open the controller, clean all the dirt from the inside and make sure the button is properly connected and not broken....
Chosen Solution i can’t click on the “unlock” (or the “ok” for that matter) button when the “SIM locked” appears theres nothing wrong with the screen it ran out of battery and when it turned on i couldnt do it anymore I’ve tried resetting it and hard reset AND I’ve already tried to remove and get back the sim slot when i did remove the slot it shows up the “no sim card” message and I could not click on the “ok” option either Hmm thats really wierd make sure your screen is fully seated again, or try reinstalling ios to your phone if this doesnts help try going to the apple store where they csn scan your device
Chosen Solution I have been having audio issues with this P8 + Huawei phone every since I got it where the person who I am speaking to says they can barely hear me even after adjusting the sound on the phone. It’s weird how on my other lower ram phone people could hear me perfectly fine, now with this phone people say the audio is muffled and like I am talking from a very very far distance when in fact the phone is close to my face and I am literally screaming....
Chosen Solution Hello I am trying to remove battery on Notebook Asus N76V, but I think it have problem with the slider lock because he is on the wrong position and now it is very hard to remove it, I tried a little force to remove it but I wasn’t able to do it… I searched many solution but I didn’t found the solution. Edit: it is Asus N76VJ but I think it’s the same way to remove battery....
Chosen Solution I was using the laptop last night and all of a sudden everything stopped. I have no power. I push the power button but get nothing. It is plugged in but not responding in any way. Any ideas on what could be wrong with it? Does the power button light turn on? It happend to me, I think the MoBo or the VGA has fried.
Chosen Solution Adt is here knocking in my car on my engine Could it be the marbles in a can sound that happens when you have a blown plenum gasket. It would be spark knock. or https://www.youtube.com/watch?v=7yp-bOFH… your drive shaft is the culprit.
Chosen Solution Hey guys, I had a an iPhone 5s come in the other day. The lady had travelled had the battery replaced while she was travelbig in Nepal. They placed an incorrect battery in the iPhone and it fried the board. I replaced the board, and battery, updated the software, shut off all battery drain settings, hard reset it, and the problem still exists! I was told the issues could be in the lightning charger....
Chosen Solution Why does my right analogue stick keep moving to the right If your Xbox One Wireless Controller has a malfunctioning thumbstick and you cannot properly navigate around your Xbox One, see the Xbox One Wireless Controller Has Malfunctioning Thumbsticks problem page for possible problems and solutions. The controller will start to wear when it’s used a lot. In this case, you would need to replace the actual joystick component found here: https://www....
Chosen Solution When I was shredding the other day I was trying to shred newspaper but it kept jamming on me. Is there a reason why it jams when I try to shred newspaper? The T7CM Fellowes paper shredder is not designed to handle newspaper. This is why your shredder is continuing to jam. If shredder continues to jam please look at the troubleshooting page on how to fix this problem....
Chosen Solution T/S reads updating software for two days now and keeps the A/C running over time Unplugging it could easily brick it… So I can only offer opinions on this. If your in warranty, I say you should try unplugging it and in the unlikely case it bricks it, send it to nest. If you aren’t in warranty, then I advise you call nest and ask them what to do....
Chosen Solution So, I have had my Galaxy Tab A for almost a year now and his is the only issue I’m having. My tablet will be hot to the touch (sometimes not) and will the commence to shut off instantly and then right after restart. After it turns back on, the issue will usually reoccur within 3-5 minutes. Also, when I change it, it will have absolutely no issue. To add, it will charge very slowly....
Chosen Solution Second docking station that she has shorted out in 3 months. She works remotely. Says that she does have a surge protector. Any suggestions? Get her a UPS Uninterruptible power supply https://en.wikipedia.org/wiki/Uninterrup…
Chosen Solution My Inspiron 17R-7720 doesn’t turn on When put the charger in the light from the cable charger turns off What have you tried so far? You could try taking out the battery to see if the charger light stays on. If yes does the laptop power up? If it works fine then replace battery.
Chosen Solution Panel buttons don’t work at all. once in a while it works and then they stop working Your control panel could be going out. This may be as cheap as replacing the buttons (if they’re worn down) or as expensive as replacing the control panel or control board.
Chosen Solution Hi i have problem with my eos 1100D. Where my SD card cannot read and the camera unable taking picture. Does the card have a write lock on it? Most SD cards come with a Write lock now, this is enabled by a small plastic slider on the card itself. please make sure that is not enabled. (http://kb.sandisk.com/euf/assets/images/…)
Chosen Solution The display of my laptop has turned red, the graphics have turned really bad and somewhat like that of old television set. This is either the graphics adapter or GPU, or the display. Best way to test is to connect to an external monitor, if the display on the external monitor is good then the problem is the display, if the display on the external monitor looks the same then it is the GPU or graphics adapter....
