Posts

Chosen Solution I keep trying to use my printer but it keeps turning off shortly after I plug in the power I already friend replacing the power module and it still keeps doing it Grabiel Its possible that the auto off feature may have been activated. What this does is shut down the printer after a set period of inactivity this is done mainly to save electricity. If you go into the setting menu on the printer look for either power settings or it may just have its own page on the menu for Auto-Off and see if that’s enabled....

Chosen Solution when I insert HDD, it will display no bootable found. Are you using a new HDD? Many HDD’s from the store are not preformatted and need to have the OS Format it so having the computer say “No bootable found” is a good thing. Just put in the OS CD in your CD drive and boot your computer up and Press F2 or F12 and access your BIOS Settings and set the BOOT Order to Boot to your CDROM First instead of the HDD then SAVE and reboot....

Chosen Solution DVD Drive missing from device manager Hi, Search your model of laptop, and with the model number etc. Search for DVD driver. And then install it. :-) Hello jlabranch How has your day/night been? You might have this problem? https://support.microsoft.com/en-us/kb/3… I have ran into this problem a few time after people have upgraded their computers to Windows 10. Hope it help Have a great day/night

Chosen Solution My mobile : Galaxy Note edge pluse. (N915FY) the Problem is after i drop my Mobile. What happend is Half black screen (Horizontlly ) , no signal presentation although the sim card is inserted, no wifi. the touch screen still working but half black!. Maybe something wrong with the antenna ,but what’s wrong with the Screen ? This is just damage to the LCD. All you can do in this case is have the screen replaced unfortunately

Chosen Solution So my iPhone 6s had a dead battery and wouldn’t turn on even if u charge it so I decided to go to a local mall to fix it and when they fixed it, it was at 39% and then I started to realize the battery kept going down really fast and when I finally got home it was around 20% something percent and it kept charging backwards dropping and dropping now it is 1% I’m not sure what to do....

Chosen Solution My laptop screen went out and now its all just dark screen. The battery is fully charged and I can still power it on and log in. But then the screen just went out. Please help!!!!!!!!!!!!! do this open the task manager and (ctrl+ shift +esc) look for windows explorer and right click on it open file location and hit enter on the explorer wait a few seconds for the explore and desktop manager to launch and when u can acess the pc… update windows immediately ....

Chosen Solution I realized that my phone is split open on the left side. It is in a wallet case and I do not use it often. What is causing my phone to split open? it sounds like your battery is swelling. Open it up and check the battery. Is it still flat? Or is it bulging in the middle? If it is bulging/swelling then it needs My Galaxy s10+ phone is splitting open at the side, the battery looks swollen, what are my options?...

Chosen Solution After long frequent use, the speaker no longer charging and power light not turning on, cord fits loosely. I opened up and no apparent damage. Suggestions? @ilovelucy24680 check the charging port for power when you have the charger plugged in. It is possible that the port simply wore out. To replace it you would need to measure it etc. and use that information to try and match one with some ports available at mouser....

Chosen Solution When I turn my headphones on, there is no sound coming out the left side of the headphones. And if there is sound, it is very shaky and ins’t even from the sound source, when I used the wire on the headphones, there was sound coming out the left side but it was very shaky. do I need to open it and replace something in the headphones? I think it is soundthing with the speaker and the bluetooth....

Chosen Solution My camera isn’t taking pictures, but the camera app is working. First try to clear your camera data. This can be done by going into the settings, then application manager, then camera and then select clear data. This resets the camera settings and should get it working again. If this doesn’t work, make sure that your firmware is up to date and does not have any infections. Firmware/malware infections are addressed on our troubleshooting page found here....

Chosen Solution Why my device won’t power on? @jocamera not a lot of information here. You should at minimum tell us what you have tried. I suggest: charging the battery,replacing the battery,check the battery door to ensure it makes proper contact with the batterycheck battery contactsDisassemble the camera to the mother board and check for bad fuses or bad component on board this guide will at least get you into the camera....

Chosen Solution my phone is getting switchoff although it has 65% battery after i charge my phon to 100 % den again it gets off at 85 % and it will say 0 percent battery It’s a defective battery. Consider getting it replaced at a reputable phone shop. I assume most of these models require taking off the screen first which risks damaging the screen before getting access to the internal non-user removable battery....

Chosen Solution I enter an address and my gps say that is waiting for a valid gas signal why. I had a similar problem and did 2 things. 1. Hold down power button for20 seconds and see what happens. That usually resets everything. 2 . Go to the website and refresh everything, it has a program to pick up gps quicker.

Chosen Solution Hey. My TV has a dark screen, but only on the left half of the screen. The right half still has an intact image. Also, on the left border of the screen, there is a little bit of a lag when I change channel (it looks like a superposition of images). Before the image turned darker, there was ghosting of the image. Now there are vertical stripes on the left side....

Chosen Solution it keep jump to the input it flashing number and say hdm1 23 and flashing pc vedro @sweetoea unplug your set from the electrical outlet to reset it. Unplug everything connected to the back of your TV. Then plug the set back in and only connect one source i.e. Cable TV. If that works then add one device after the next and see if it works. It has not done nothing but making noise noise it’s unbearable to listen off a blank picture....

Chosen Solution When i want to turn on my htc it will pretend it will turn on then stay on the white background, i have tried everything on google and the factory reset and it still wont turn on,what do i do??? Reflash stock firmware

Chosen Solution hi, can someone let me know where this is? 2011 Elantra 1.8L thank you It is in the front of the engine, down low, just to the right (as you are facing the car from the front) of the oil filter. @rnps old question and just to clarify. The camshaft position sensor is (are since we do not know if this is a 1.8L DOHC engine which would have two) located under a cover on the TOP right of the engine....

Chosen Solution I check if the problem is present on a different computer , and from the same router machine. And there is no problem. So the router is not blocked. It must be an IP related blockage. Thank you. Also… I suspected maybe is a special dedicated virus for blocking a website on a specific IP? I scanned my computer with an AV (antivirus) Malwarebytes and nothing is found....

Chosen Solution All of my pictures are black. I don’t hear a clicking sound when I take a picture. I’m not sure what is going wrong. A potential reason to why your pictures are all black is that there is an error with the shutter mirror. Different ways to address this issue is to turn any of the special features off, to even shutting off the camera by taking out the battery that could cause the mirror to jump back in place....

Chosen Solution E1 flashes on the display & the shutter count won’t go up when I take pictures An E1 error on the display is indicative of a failure of the ribbon cable that connects the PCB to the camera lens. When zooming the ribbon cable flexes and can fail after excessive use. The cable can be replaced, if you can find on to buy.