Chosen Solution Hey guys, i´m planning to upgrade my iMac 27" EMC2639 with a SSD next to the original 1TB HDD and use it as a fusion drive. The problem is, i don´t know which pci-e connector is on the logic board. Is there the 8+18 pins (like the one in my macbook pro 15" retina late 2012) or 12+16 pins version in it? I dont know what ssd i should buy?...
Chosen Solution Sometimes it will start but, most times we have to jump it. The engine engages because you can see it turn. Sometimes manaly turning it helps it start. The battery is new, all electrical has been checked. Fuel line and carburetor are clear. There is a click when the key is turned and sometimes there is a pop when the engine starts to engage. My husband says it’s not the fuse or it wouldn’t start to begin with....
Chosen Solution Whenever i want to open any game the phone gets stuck. Further when i try to open any audio or video it pauses automatically. Can’t seem to make calls. But when i use the phone with a headphone it works fine. Any solution to the problem would be a great help. If it works while headphones are plugged in, and rebooting hasn’t fixed the problem, there’s probably a physical problem in or around the headphone jack itself....
Chosen Solution blu advance 5.0 with 5.1 lollipop need manual for blu advance 5.0 with 5.1 lollipop. i can only found ones for blu advance 4.0 and blu dash 5.0. i have looked every where only thing ican find is where one can be bought beginning to think this phone bad news any help will be greatly appericate Call BLU at tel:1-877-602-8762 or 1-305-715-7171 they will send you a PDF
Chosen Solution my phone just went quiet on me it can go white if i insert the battery but will switch off itself i can also hear a buzzing sound its making please help me It could be many things, so if you dont mind, i will just ask a couple questions to get a better picture. Please feel free to be as detailed as possible. So you have the phone, with the battery out, when you put the battery in and turn it on, does it fully come one?...
Chosen Solution HTC Sync manager says no phone is not connected. I have installed the drivers and windows detects the phone. HTC M8t With your PC turn on and booted into windows connect the phone with a usb sync cable. Now go to the device manager which is located in the settings menu under hardware and sound. Open the device manager and locate the HTC one M8 and click on it to open its options/information menu....
Chosen Solution A few weeks ago the three buttons (home, back, menu) stopped working out of nowhere. Literally my phone died and when I turned it back on after charging, the buttons no longer worked. I was able to download an app so that I didn’t have to worry about it. Now the bottom portion of my screen no longer works. I believe the screen is dying from the bottom up and I don’t know why....
Chosen Solution Headphones work great, no issues. The in-line mic and volume/skip buttons do not respond at all. When a call comes in when I have headphones w/ mic in, it comes through the headphone but I must speak into the mic on the phone. I understand there’s a contact in the headphone jack that the phone registers when you plug a supported headset in…as far as I can tell, this is not obstructed by lint or anything....
Chosen Solution This is more of a question than a ifixit problem. Can anyone tell me why some DVD players will play subtitles and others will not ? My players and my DVDs are all region #1. VERY confused. Thank you for any info you may know. Hi @ramses2 Just to check if you use the remote control to toggle the subtitle button, does it display? I know some dvd either has to set in the menu to display or global setting of the dvd is set not to display by default....
Chosen Solution Woke up one day and noticed my Mac book pro 2015 2.5 ghz i7 quad core won’t boot completely, boots up to Apple logo with the progress bar then restarts Sadly, this sounds like you have a dedicated GPU failure. This could be a simple tantalum capacitor failure or it could be the GPU is blown. You’ll need to find someone who has the skills and tools to service your logic board....
Chosen Solution My Volvo s60 won’t idole and dies when I release the gas what’s the problem Your air filter or fuel filter may be dirty. Check both of them; if you aren’t sure that they are clean, replace them. If it has been a long time since you have replaced either one of them, replace it.
Chosen Solution This is my second brand new machine. Worked well for 3 months then put away for 3 years (co-habitation). Now, when trying to prime it for further use, water leaks out of everywhere on the underside: all around the steam wand big hex bolt head, and around the brewing head, where it meets the metal underside. NO water comes out of the steam wand or from the centre of the brew head: it is as if there is some seal that has dried out and is now too small....
Chosen Solution When I open my macbook the screen will not light up. I have to play around with closing/opening it a little and sometimes it will light up. I’m guessing the problem is the backlight so do I need a new cord connecting it to the screen or do I just need a whole new screen? Which model Macbook do you have? The first step is to try and reset your SMC, you can do so by following the directions below; Resetting the SMC on Mac portables with a battery you can remove Shut down the computer....
Chosen Solution my iphone keeps clicking on random apps and the phone dose not let me type my password in ethier Usually this is either from a cracked screen or a bad replacement screen. If the screen was replaced recently by a repair shop take it back to them to get a warranty replacement. Otherwise the screen will need to be replaced to fix that. iPhone 6 Screen Replacement iPhone 6 Screen
Chosen Solution I see the black text when I turn it on but not the white lcd light. I turned it on and the white backdrop flickered on and then off. It’s usually off though. How do I fix it? Dj DaMan going by what you are describing, this sounds like a bad backlight. Check all connections/connectors to ensure they are properly seated and not bend, corroded etc. If all of that looks okay, you may have to try and get a new display TI-84 Plus CE Teardown
Chosen Solution Hi, when I power on my camera and the lens comes out it imediately starts to make a strange humming vibrating noise. The camera still works fine, but the noise is killing me. Looks like the auto focus or the stabilizer is constantly adjusting. Is there a solution for this or should I start looking for a new one? Thanks I had the same problem, this humming vibrating noise when powered on....
Chosen Solution Hi, I had a broken screen on my iPhone X and i ordered the screen replacement and i received it. I fixed the new screen correctly as it needs to be done, after i finished i turned on everything is working perfectly except the “Ear Speaker”. I am not able to use the phone at my ear to make any calls either i have to use loud speaker or a headphone to make calls....
Chosen Solution I have been using ASUS X452C series laptop for about 4 years. Nowadays after some time of opening my laptop the CPU shows 100% and after some times the PC is shutting down. If I use only MS word the same case occur. It is not possible to open any video player because of overheating. I have recently cleaned up the dust of the laptop and my cooing fan is running properly....
Chosen Solution I have a Luke green lightsaber from Disneyland. As soon as I turn it on, it’s fine but as soon as I start to move it, it begins to glitch. The lights and sound flicker. It sounds as if the motion sensor is stuck in one place, and it keeps going back and forth. I’ve already tried taking it apart the hilt to see the problem but have had no luck so far....
Chosen Solution I don’t have any apps open, I’m not on it but it’s still dying when I try to charge it. I bought an apple charger incase it was that but now it’s just dying all the time!! The 5s has been out for a while, it could be the battery itself is just going bad. After so many charges it just can’t hold as much power. I’d also check and make sure the port is free of any lint or dirt....
