Chosen Solution My laptop powers up to the desktop then flickers and goes to backlight blank screen Update (04/08/2017) I did not mean to accept the answer. I still need help There could be a couple things going on here, The first thing i would try to do is load the computer into safe mod and see if it does the same thing. If it does the same in safe mode then it could be that the video card in the unit has gone bad....
Chosen Solution i was messing around with the iPod since i haven’t seen or used one in forever and i had put a code and i changed it to 0000 since i don’t need one. how do i turn it off? You may find this video helpful.
Chosen Solution a few weeks ago i replaced my sisters screen that was bought from here(ifixit) and the ear piece isnt working the way it should be the volume is all the way up but sounds like its whispering ever since i replaced it If your system volume is down, then obvious answer is you need to turn the system volume up, but maybe your speaker got damaged t some point (water, etc....
Chosen Solution The screen is loose I can feel it move. If I try I can pull it away from the unit kinda easy. Lately it has a spot on the screen that seems to click by itself. what needs done? I dont see and visible cracks in the screen. If the screen is separating on it’s own, it could be a few things such as a warped frame from impacts, a swollen battery, or a poor repair job....
Chosen Solution Hard Drive crashed and inserted retail CD disk and ran utility indicated was not repairable. I tried repartitioned (journaled), ran verify and repair and indicated that the volume was ok. It Installed retail 10.5.0 properly. It then downloaded combined update of 10.5.8 but would not install indication that it could not install on the volume. I assume the HD is still bad or there is a software issue. I believe this is the same software CD I installed earlier on this machine....
Chosen Solution i was on my iphone when the screen just blurred out to a blackish grey color, so i tryed rebooting it and now it does nothing. It will not reboot or nothing, the battery was changed when this happened, But it still will not do anything, like its just completely dead. Any Help with this problem? Did you drop it? This happened to me after physical damage. I changed the battery and the screen but the iphone would still not work....
Chosen Solution I’m having trouble powering on my printer. Hello Laura, Your issue could be a variety of things but my first thing I would like you to check is if your power cord is connected to a working wall outlet. If this is not the case then you should check if your power module & battery are working. Please check out my troubleshooting guide for more help. If you have any more issues, feel free to ask me another question
Chosen Solution My phone died for low battery. Then wouldn’t charge anymore. Won’t even show anything if I plug it into my apple desktop. Troubleshooting charging problems starts with a usb ammeter and known good parts, i.e. known good battery and charge port. A usb ammeter will tell you if the charger voltage (5v) is doing anything or just sitting there. A normally charging phone will consume about 1A of charging current....
Chosen Solution I somehow managed to strip the screws on my heatsink while removing it to replace the thermal paste, I would like to replace them sometime in the future but I can’t find them anywhere on eBay.
Chosen Solution Hi, An iPhone X was brought in by a customer with a white vertical line on the screen and faulty touch. As per usual I replaced the screen and everything was fine. However, after 2 weeks they returned with a new set of vertical white bars but with working touch this time! Could there be a problem with the mother board that causes the screen to go bad? They claim there was no incident that could damage the screen physically....
Chosen Solution I bought this drill for the convenience of it not being corded. But when I am trying to drill holes through two inch pieces of wood, it dies half way through. Does this drill really lack that much power? Hi Eric, Great question, the truth is this drill is not the most powerful of drills. But if your drill used to be able to do it but now cannot it may be that your battery has gone bad....
Chosen Solution My Bop-It Micro has distorted audio. How can I fix this issue? The most likely cause for your Bop-It’s distorted sound is that the speaker inside the device is damaged. There is a guide on how to replace the speaker linked in the troubleshooting page for this device.
Chosen Solution It’ll just, out of nowhere, shut down. Then, shows that screen that you see after an update or such. But, I’m usually up to date on the updates, so that’s not the problem. I also make sure to keep the laptop from overheating, so. Can you go to Settings, Windows Updates then Advanced Options then turn on Update Notifications. This should help you find out if its Windows or hardware related :) I would also suggest taking the bottom cover off and seeing for dust build-up....
Chosen Solution my phone has colorful lines when i dropped it @faceassfacewith most likely a broken LCD. We can verify this once you post a picture of what you LCD dispalys with your question. Use this guide Adding images to an existing question for that. This guide LG G Stylo Glass Screen Replacement as well as this video should get you there.
Chosen Solution The volume has faded on my samsung LCD TV. The volume was fine at 15 but now needs to be at 80 and is still faint It probably is a problem with speakers, not the actual TV. Try hooking up new speakers.
Chosen Solution My phones gets slow when ever i connect to wifi and apps take long to respond Hi, Have you checked that the software (aka firmware) for the phone is up to date and also for all the apps that are installed? Have they been updated lately? Open the Play Store app and check. Try starting the phone in safe mode and check how it works when you turn on WiFi....
Chosen Solution The R trigger is very sensitive to the point where it feels like if you even shake it, it will register. In games like smash 4, this has caused menu’s to be rabid, and hard to select which mode I want. I air dodge and roll all the time unexpectedly. I am comfortable with a full tear down if any solutions require that. So I’ve tried cleaning the sensor with rubbing alcohol, and cleaning the sliding rails, but it hasn’t fixed it....
Chosen Solution The tablet will not turn on. The screen stays black even when I press the power button after the tablet has been plugged in to the charger all night. There are a few reasons why your tablet is not turning on including charger or battery malfunctions or the display may not be working. All of these issues are addressed and proper solutions are provided here on our troubleshooting page....
Chosen Solution Why does my computer’s power LED keep blinking amber but doesn’t display anything? Then you need to remove the faulty unit and replace it with a good one. Just follow the procedure described at p.19 on the user manual, the size of the PSU you need to buy varies depending on the specific model you have, a common PS2 unit should fit into the tower, but you’d need an SFF unit (like this one) if you happen to have the smaller model....
Chosen Solution I am working on a Mini 2 and doing a LCD And Glass replacement. This was/is my first mini 2 ive taken apart so i wanted to test my work before sealing it back together. It boots fine, i see the apple logo a can navigate the OS once its fully boots. But once i let it sleep or even tap the power button then try to turn it back on, i only get a backlight....
