Posts

Chosen Solution I have about an 8 year old Kenmore Elite HE front load gas dryer that is having issues in normal cycle. When I put dry towels in it, only 1big towel and 1 hand towel, it starts at 41 mins, it runs down a few mins then jumps down to 19 mins then 5 mins then 1min in about 5 min time span. When I soaked the smaller towel, ringed it out by hand, and dampened the large towel, it started at 41 mins then ran down to 8 mins in the proper time length then jumped up to 12 mins ran down a couple mins then up to 16 mins....

Chosen Solution Hi! Question, my go pro plus lcd wont turn on after freezing. We used it for scuba diving and it was working while we are diving then when we finished it froze and we waited til it turned off then now it wont turn on. How do we turn this on? Please advise. Have you checked the waterproof case for any leaks?

Chosen Solution My GPS picks up no satelites. When I google about fixing this I see two pieces. One is kind of chunky and the other is a connector cable (see attachment). Is the blocky bit the thing that has to be replaced? Do I actually need to replace the ribbon cable bit? I can give you a website that has all the parts you might need to repair the phone....

Chosen Solution I rebooted my iPad 2 with a computer since it has a broken power button but now it is completely dead! It will not show a screen when it’s plugged in nor does it makes a sound! I did leave it plugged into the wall for a while but no results so far. Hi you can plug-in wall and leave it for 35 minute Even your power button is broken just leave it plug Now if is not power on switch on your Pc before you connect your iPad open iTunes then connect to your Pc and leave it about 20 minutes Good luck

Chosen Solution My tablet had purple lines in the screen then I pressed the reset button and it turned on again. About half an hour later it done the same thing but after that it wouldn’t turn back on again. How can I fix this. You need a new screen the lcd has pressure damage

Chosen Solution I recently purchased a Porter-Cable 382 at my local home depot. I had been using it for weeks and haven’t had any issues sanding down some objects. However I went to use my sander today and it is no longer sanding the surface like it had done so well before. The head is spinning but not sanding, please help. If your sander is not sanding there could be a few different problems....

Chosen Solution While I use my tablet the screen turns off automatically and the screen blinks and it shuts down automatically and restarts again….after I use it for a while again it does the same manner @Philip Judson Try starting and using the tablet in safe mode and check if it works OK. If it does then a downloaded app is the cause of the problem. The trick is to find out which one....

Chosen Solution i put the throttle stick on the highest position and the propellors just move faster but the phantom doesn’t fly up Pls try to calibrate your RC and check the setting maybe you accidentally change in RC System assistant pls try mode 1 if currently set in mode 2 or vice versa. Mode 1 settings Left joysticks are for ascending and descending Mode 2 settings Right joysticks will be for ascending and descending or do the full calibration of your RC by calibrating RC assistant first then Vision assistant after

Chosen Solution So my note 4 won’t turn on at all and when I tried changing it with the power off, the battery symbol just keep flashing on and off. I have tried pressing the volume key + power + home button but it didn’t work at all. And before this happen, my phone kind of started to lag and the battery started to drain drastically before turning off by itself and restarting the phone and then turn off again and now it won’t even turn on....

Chosen Solution The kindle is charged the green light comes on but the screen won’t light up I would see if you can see anything on the screen when you get it into the light just right you will need to use a bright source of light if you can then it is a back light issue. if you can not then the problem is ether the screen or the the device itself....

Chosen Solution My moto g6 play was dropped, but the screen was not cracked. As soon as it happened, it went to a black screen and has not turned on or shown an indicator light when attempting to charge. Am I going to have to replace the digitizer if not the phone, or can I do some kind of at-home repair or tear down? @luv4motos this sounds like a broken display not the digitizer....

Chosen Solution I’m a Product Designer and currently I’m working on a project that includes embedding an Apple watch. Because of this I’m researching about the components and structure of the watch. I found most of the information, but I couldn’t figure out exactly where and how the button flex assembly is connecting to the rest of the watch. Thank you so much for making the teardown video and pictures, it’s very helpful and interesting....

Chosen Solution my nexus one screen is brooked and i want to replace please help me The HTC nexus one LCD screen is available in two versions from two OEM manufacturers, the Sony Company and the Samsung Company. which one can i use to replace the LCD screen. Gaurav Kishore , the Samsung version LCD screen is compatible with both the Google nexus one and the HTC desire, while the Sony version can be used only on the HTC desire....

Chosen Solution Can you tell me which ifixit replacement batter I need and tool kit. Thanks the battery will have the descriptor listed on the battery you are replacing. match to this when ordering your new one. for your model it is usually as16a5k, as16a8k, as16a7k…depending on the mah/ other variables. just make sure to match what is on the one you take out

Chosen Solution Hi there, My phone recently fell and i got it fixed. Unfortunately i brought it to someone who made a botch attempt at fixing it, long story short the keys u, n and j dont work. The screen also glitches out sometimes and opens up stuff randomly. So i decided enough was enough and brought it to a professional. He was very helpful and did a good job, i posted it too him but left my pass code on it and when i received it back he left a message saying he couldn’t open it to check if it worked....

Chosen Solution When I plug the cable into my computer from my camera, nothing loads on my computer that allows me to transfer the images. It accepts USBs and has never had a problem before. What could I do to solve this problem? Check the cable. It may be loose. The auto power may be active. This will turn the camera off while it’s not in use. Compatibility may be a factor....

Chosen Solution why cant i download apps on my lg k330 without deleting some of my apps Hi, Seems as though you have run out of internal storage space. Have you got an external SD Card inserted? The maximum capacity micro SD or micro SDHC card that can be installed is 32GB. Have you tried moving some of your apps to the external SD card (if possible). By default, Android installs apps in the internal storage area....

Chosen Solution I have to adjust my volume after every song played on my I phone? Do you mean that the volume keeps on changing after you play a song. That’s a soft wear issue and try to reset speaker.

Chosen Solution When I go to take a picture on Auto, it keeps changing to close up then back to Auto, and close up, some times does don’t settle down al all, another time it’s ok. OK I solved my “Own Problem” by fixing the camera myself. If you search on “Fix It” you will find “how to fix a “Nikon Cool Pix P600”. It will show you how to take apart the camera and reassemble....

Chosen Solution I just replaced the battery in my S8+. When I plugged it in to be conditioned, the red light began blinking. I left it on the charged for a couple of hours with no change. I assume I reassembled it wrong, but I do not see anything out of place. Any suggestions would be appreciated. Thank you. @geek2150 there is always a possibility that this is a faulty battery....