Posts

Chosen Solution My UE Boom will not charge, I’ve tried different power button/volume button combinations and it still won’t work. I go to charge it and nothing happens, only the red light flashes. I put the charger into my Xbox because it’s got a USB input in the back and that didn’t charge it. What should I do? If your UE Boom speaker does not charge, see the UE Boom Won’t Charge or Loses Battery Quickly problem page for possible causes and solutions....

Chosen Solution I played tapes and then after pushing the button it’s been stuck. My cassette came out, but now my records don’t sound the same. I am working on a similar problem for a similar unit which includes turntable, cassette player, CD player and radio. The unit was manufactured by EMI Global Inc. and is a model CSL9. In this case a cassette is still stuck in the tape player, and the eject button will not pop out....

Chosen Solution I’ve faithfully and carefully taken my granddaughter’s Nintendo 3 DS XL apart to replace the top LCD and am putting it back together. After I got the motherboard reattached with the ten screws and all the ribbons in place, I turned it over to check that all the buttons were functional and in the right place. When I touch the power switch, it falls out of place, like it doesn’t have anything behind it to keep it in place....

Chosen Solution So my computers power button won’t turn on so I’ve dismantled the frame. I am currently looking for the power pads. Could you help show me the where abouts? Well, Apple engineers engineered the new macbook airs and long story short some people got fired and the power pads just don’t work with the airs. Apple really should help you because it’s been less than a year. I would try and find an Apple Authorized Service Provider because they are a lot more reasonable and like mayer said, they have ways to hold apple’s feet to the fire....

Chosen Solution temperature guage not not working @fleetas you did not tell us exactly what temperature sensor you are looking for as well as your model year and proper engine size. Depending on engine size, the CTS (coolant temperature sensor) is either screwed into the thermostat housing near the top radiator hose or it uses a cylinder head temperature sensor which is most commonly mounted on the front of the cylinder head....

Chosen Solution I will be replacing the battery in my series 4 and wanted to confirm the best adhesive to use when sealing the lcd back into the watch keeping full waterproofing still. I’ve seen people use b7000 or you can buy the precut tesa tape but I was told cold press glue is the best thing to use? Use the recommended adhesive strip: Apple Watch (44 mm Series 4/5) Adhesive Strip...

Chosen Solution I turn on my Ipod touch 5th gen (Model No. A1421), it turns on, charges, home button works, power button works but yet when i swipe it just doesn’t work and it’s not a case of it freezing because i’ve tried the restart method many times. It seems like its a touch sensor problem or something like that, what would it be that i’d have to replace/fix? Any history with the device?...

Chosen Solution I changed my former Nissan pathfinder gearbox that was faulty to a new one barely 4 months ago. The former gear box was not changing. It only moves on 1st gear and that’s very slow as it wont continue to change and move faster. I had to change the entire gear. I then discovered just today that when I try to move on drive D, it won’t. But its moves on reverse R and on drive 1, 2....

Chosen Solution got up this morning and when I fired up my mac pro first generation screen has a heavy blue tint,thought it might be a monitor,so I switched them out but also had it on the 2nd one could this be a ram problem? I’m going to take ram out and reinstall but have no clue why this is happening,any help here please send me an answer to Rick email is trekman4780@att....

Chosen Solution just bought my hover1 go kart and i have two right arms one arm is VERY close to the leg and inward while the other arm is straight? is this a defective part or is this normal Hi @toybutt3 , Are you sure that the arms have been installed on the correct side? If the left arm was installed on the right side it would be close to the leg....

Chosen Solution When I turn my Keurig on, it automatically picks a cup size (that button lights up). Then when it says it’s ready to brew and I try to brew, it is silent and nothing happens. It won’t let me choose another cup size. Usually when this happens with Keurig’s it needs to be put through a scaling cycle. Usually they want you to buy some expensive descaling solution but simple household white vinegar does the trick....

Chosen Solution Hello. I have an HP Laserjet P1102w that prints clearly but whenever it prints the prints comes out in a slant way. I seem not to understand whats going on with the printer. I have cleaned the head and changed the toner but its the same result. I’m hoping I ll be able to find an answer here. I have several clients that have the same printer… usual fix is totally delete the printer....

Chosen Solution My kinect keeps switching off and needs to be unplugged and replugged in for it to work. When I am on the kinect settings the camera keeps switching on and off. Any suggestions as to the problem? So I’ve had this problem for about a year of the Kinect turning on and then off by itself. I looked on YouTube and found some videos where people took it apart and checked the thermal fuse in side so I decided to follow suit… the fuse was intact as I figured since it was still coming on at times....

Chosen Solution I haven’t dropped my phone or anything in a while but my flash and my front camera stopped working I don’t know why maybe it’s my phone. And would anyone know how much a replacement of the front camera would cost and the flash issue fixed? Hello, if you decide to do it yourself it can cost around $30-$40. But first I would suggest you look if the parts are in place by opening the phone and tightening any loose screws!...

Chosen Solution My navibot Doesn’t switch on. The Battery is charged but all lights are off. I tried to Clean it but Nothing changes. @doxdici you will have to disassemble it and take a look at all connectors and check the battery to ensure it is working. A dead battery may appear to be charged but does not hold a charge. Start off with this teardown Samsung NaviBot SR8855 Repair and take some pictures of what you encounter....

Chosen Solution I purchased and installed a replacement screen from iFixit. All was well for several months, then it started having these strange artifacts. The top of the screen image becomes interlaced with the bottom third of the display. It seems to be connected with the display brightness, as well. The artifacting is worse at higher brightness settings. I tried emailing iFixit support two or three different times, but they never replied to me....

Chosen Solution Hi guys, I’ve pulled apart my son’s Brio fire engine because the lights & siren wouldn’t work. With the button removed it works sometimes but hardly ever. See video: https://youtu.be/kQ22iZf1Q7Y I’m wondering what’s wrong with the button & if there’s a way to fix it. Thanks. It could be a cold solder joint, or a loose wire that needs to be resolder, and thats why its not working continuously....

Chosen Solution My oculus quest hasn’t been charging properly, my original charging cord stopped working and now I’m using my airlink cable to charge it. But when ever I’m on it and I have the cord plugged in, it doesn’t keep it charged. This is with PCVR (Oculus Link), right? If so, then I have this problem aswell, and it seems to be the fact that its mainly just data and not power....

Chosen Solution My phone is not charging. I have tried to plug it in multiple different outlets and checked to make sure the cable is not cut anywhere. What can I do now? You can unplug the charger and clean the connector and if that does not work you can check to see if there is corrosion on the charger adapter or if it is loose in the phone. If this is the cause you may be in the market for a new charger....

Chosen Solution So my Game boy had the problem where some of the lines in the screen wouldn’t show up, so I tried fixing it. After a while though the screen stopped turning on and I can’t find out the problem. When the switch isn’t all the way on it shows some lines lit up so I know the screen works somewhat. Also, the noise plays when I turn it on so I know that it is working....