Chosen Solution when i press play, sometimes the button gets stuck on my device Hi Diego, This happens to me too sometimes with these kinds of buttons. One button always tends to stay pressed in and I have to press a different button just to get the other one to pop back up. I’m not sure as to why exactly, but if this method doesn’t work you can look at their troubleshooting page for this problem here....
Chosen Solution I have purchased a new power supply and logic board for Imac EMC#: 2429, with still the same results. Led 1 lights, led 2 does not when power button is pressed. Power button checks good with continuity check. I have 120 volts into power supply. Pin 4 @ PSU is 12 volts, the only other voltage is 4 volts at Pin 6. Verified voltages @ Logic board, same pins measuring the same....
Chosen Solution When I press the power button on my device, nothing happens. My device is unplugged, and is not turning on. One reason why your device may not be turning on is because the battery is dead. Try plugging in your computer to allow it to charge before turning it back on. If this does not work, your device may need a new battery.
Chosen Solution I had my Playstation 2 ‘stored’ in a drawer of my room. When I decided to rehook it to play after possibly 3-5 years, it was very dusty. I took the time to make sure I blew out remaining dust inside the console and on the surface, along with making sure my game disk was in decent condition to play. I found that my disk was not being read properly no matter how many times I tried, so I looked into detail to see if the laser was working, or if it was spinning....
Chosen Solution Hello, Im going to describe as best as I can the problem in detail. First of all, I bought this laptop with this problem and theres no warranty anymore. first i noticed problem when I played some online games. There would be some latency problems that lasted around one minute and the delay was somewhere between 1-2 seconds or it would disconnect from wifi. During those lag spikes there would be some other issues like clock jumping back and forth when clock is not set on auto sync, weird quick audio jitters....
Chosen Solution i think my phone camera autofocus has problem(s). It can focus on close up object but its blurry when taking a distant image. Why is that and how do I fix it? Check if wide aperture icon is toggled ( the icon next to flash)deactivate it with one touch to return to normal camera mode.
Chosen Solution I brought my snes out of storage after a few years. I hooked it up properly, inserted super mario world, turned it on and I could clearly read the words “Nintendo presents” but when it went to the next screen the picture looks jumbled-like a jigsaw puzzle that’s missing pieces. I tried another game and it was the same. I cleaned the games and the console. I tried 3 other t....
Chosen Solution My PSP is not reading my UMD discs. Please help. Update (03/26/2021) It doesn’t spin at all. Yes it boots ups. No errors. The discs looks clean. Nothing jammed. Under worked before. It is updated. when you put the disc in does it spin up? if not you may have a tough time. does it atleast boot up? does the PSP give any errors? inspect the disc and see if its dirty....
Chosen Solution whenever i turn on the car the time will flash on then turn off and my radio wont start up First thing to check is the fuse. Hi @jasonoverbey4 Check that fuse #28 (& possibly #39) in the passenger compartment fuse panel are OK. The fuse panel is located below and to the left of the steering wheel by the brake pedal. Remove the fuse panel cover to gain access to the fuses....
Chosen Solution Why is my RCA Voyager stuck in fastboot mode? First turn off the tablet. Next press and hold “Power” until you see the manufacturers logo on the screen, then release the power button. “Quickly” press “Volume Down” and hold it for few seconds until you see the message “Safe mode: ON” or something similar. If you wanted disable it, simply repeat the steps above, and you should see “Safe Mode: OFF” rather than on....
Chosen Solution So this isn’t for me, it’s for my mother but her screen just stopped working she can’t press anything on her screen. Sometimes it works but when it doesn’t it opens random apps and types random letters. It’s opened maps and Reminders. We took off the screen protector to see if it was messing with the touch sensors but it didn’t help. Well if she has dropped it a few times, odds are she damaged the digitizer which senses the touch....
Chosen Solution tv is just beeping, why is this problem Unplug TV from wall While this fix sounds obvious, unplugging your TV from the wall socket is the most common way to get it to turn back on. Remove batteries from remote Factory reset TV without remote Reseat power cord in back of TV Select the Correct Input Source Regards, Will
Chosen Solution I exchanged my battery with a new one yesterday exactly like described. the new battery does not work as long as expected (max. 3 hours) and the battery indicator light and the white led on the front seem to have a problem now. when my mac is closed they work fine, when it is open they just shine really on a low intensity. what could be wrong here? Update (02/02/2018)...
Chosen Solution Bottom of my screen stops working most of the time that most buttons that appear around the area become inactive - i have to rotate the screen to landscape just to use these buttons. Occasionally the screen would also start to click things randomly without any touch from me. I’m confused and not really sure if it’s software or hardware related, i tried hard reset but it didn’t help....
Chosen Solution My acer iconia W5 tablet won’t charge did you have to wiggle the charger in the past to get it to charge? what is the battery voltage? I have been charging my tablet for 3 days no success what to do? Hello bt4346 , i am Glad that you asked this question and i have seen on internet lot of people face this issue . first try checking the charger see if it is fine ....
Chosen Solution If I tried to load more that 8gb total on my iPod (120 gb) it will click loudly, then reset, corrupting the info on it. If I load less than 8gb on it, it plays just fine. I’m assuming it needs a new hard drive? you’re right - clicking noises are pointing to a hard drive problem in my opinion there are 2 possible problems 1, the zif cable of the hard drive is not seated well 2, the hard drive is dying use the repair guide for the Hard Drive to see if the problem comes from the cable (but since it’s always on the same area of the HDD - i think it’s number 2) if it’s the harddrive - you will find here a working one
Chosen Solution The display IC of my mobile is been damaged….As per the mobile repairer acknowledged me…….now i am repairing the one with some second hand market parts on my own….so i wanna locate it Basically the IC passport is located at the back next and around the battery, I’m not to strong of knowledge in BlackBerry but I hope this website helps :) https://www.google.com.au/amp/s/forums.c… Goodluck
Chosen Solution where is the fuse located on a 1992 gas ds club car? larryratliff check the wiring form the key switch to the solenoid. According to the schematic there will be a fuse I have a Cub Cadet Golf Cart. I put 6 new batteries in (very expensive) expecting that to be the issue with the cart not working, it wasn’t … The owner of the battery store came to my house checked everything and it isn’t the batteries....
Chosen Solution Sorry, The key cap’s are just not available yet. Normally I would you just go to an Apple Store to have them replace it under warranty. The rub here is the stores are closed, the next option is locating an Apple authorized service center that’s open all they will do is ship your system to the Apple repair depot. Or… Get a bluetooth keyboard for now until the parts become available or when the Apple Store’s open up....
Chosen Solution Camera takes quite a while to focus then flashes “busy” across screen when trying to take a picture. I have cleaned it and replaced memory card but is still doing it.It is on AF and it does focus on subject but then flashes BUSY and wont take picture The flash is charging, or the settings are not correct (shutter speed/ f-stop etc).Try setting on auto and going outside to avoid needing flash to check this possibility....
