Chosen Solution I just charged the battery but when I turn it on, it turns off after 2-3 seconds. mjragarcia most common issue for that is a stuck lens. Your camera will turn off if the lens does not fully extend etc. Check on here and let us know what you find. Use this guide Canon PowerShot SD 600 Lens and Motor Assmebly Replacement to start working on it.
Chosen Solution I started noticing this problem outside in the cold. I didn’t take much notice of this problem as I thought this was because of the cold. Now when my phone is indoors and at room temperature the battery might randomly go down to zero and it turns off. This is very annoying now especially when I’m in the middle of doing something important. In addition I don’t always have access to a charger so if I want to call/text someone I can’ because my phone has no battery....
Chosen Solution Whenever I’m using my phone, it automatically turns off. Then after about 6 seconds, it turns back on again. And when I unlock the screen, the background I previously had, is changed into another one. Can anyone please help me with this and does anybody know what is causing this? Thank You! Try to do a factory reset if possible it could be a corrupt os system or a bad heatsink
Chosen Solution It works fine for Ask Google, but not when making or receiving calls, why? Hi @brizzle71 , Most mobile phones have 2 internal microphones. One is used on “standard” mobile phone calls and the other is used when the phone is operated in “loudspeaker” mode. Some apps also use this microphone when making calls etc. Not sure which one Ask Google uses but if the phone is away from the face then most likely it is the same microphone as the one used for “loudspeaker” mode....
Chosen Solution why dont my cooling fans increase in speed to keep my imac cool apple has them set (i believe) to ramp up at 90degrees celcius. A temp sensor may not be working, or it hasnt reached the 90 degree mark yet. I would install this app TG Pro so you can monitor your thermals and fans. If you need to you can turbo the fans to pre-cool the system when you are planing on being aggressive in your processing/graphics load....
Chosen Solution I set my GPD XD down for a moment to do something but when I picked it up it had a android bot on it. It has a red triangle with an exclamation point in the middle. I have tried turning it on and putting it on the charger. However the andriod bot doesn’t go away. Can anyone help me. Cycling the power should allow the unit to reboot normally....
Chosen Solution Whenever I unlock my phone both the Opera browser app and Play Store app open automatically. How do I stop this from happening? Go to your settings, then apps, then find each app and force stop each one. Then lock phone and unlock it and reply with what happened
Chosen Solution the screen flickers and jumps. It is unreadable. If i press the apple insignia on the upper left hand corner it will stop. Any suggestions? Could be a number of things, depending on the year. It is most likely the LCD or LCD cable, or the screen has been damaged (if it is a newer Retina model). It is most likely the LCD if you put pressure on it, and it stops....
Chosen Solution But when I hold the mute button down it stops and then when I turn them off it goes away I found a solution that works for me, turn of noise cancelling. To do this (If you have studio 3’s (mine) or solo’s) double click the button on the bottom right side of the head-set. The sound goes away for me I’ve had the same problem with Executives. Beats are junk....
Chosen Solution Yesterday, my [#|Iphone] 6+ was working fine, I was able to play games and stuff. So I charge it and slept, I woke up at 4:00 am and saw that it wasn’t charge anymore and my mom is charging her phone. So I took my phone and saw the battery percentage was 3%, so I restarted my phone. When it restarted, it showed that the battery low battery. So I charged it, after a little while it opened but it only showed the background picture without the time and date and closed again saying that it is low battery....
Chosen Solution I have a GE Monogran built-in refrigerator. It used to stop cooling altogether once every few months. Changed the damper and ice maker. Now the freezer is working ok. But the fridge side does not cool enough. It stays at around 45 degree. The timer seems to be working, (turning), and the motor is working ok. We were told the insulation in the wall between the freezer the fresh food section is worn out....
Chosen Solution why the fan doesn’t turn when on only makes a humming noise. @chinoleon usually an indication that either the start capacitor has failed or that the motor windings are burned. Try to disassemble it and post some pictures so we can see what you see. Adding images to an existing question why the fan only makes a humming noise it doesn’t blades do not turn around.
Chosen Solution Hello! I recently dropped my Polaroid mini Instax 8 and was unable to find the 2 little shutters or the black circle that covers them. I’ve been looking for parts but I can’t find them and I was hoping not to have to buy a whole new camera. Is there a warehouse I can order from or a site that sells these parts or even répare kits? Best and thanks so much !...
Chosen Solution When powered on, the unit emits high pitched whooping sounds (see video). I opened it up, hoping to see something obvious, but everything seems fine for a 25yo device. It does this both on battery and on Wall plug. Suggestions? I don’t have access to an oscilloscope, just a soldering iron, multimeter and limited understanding. @okeribok that does not sound like interference. It sounds like a bad power supply (MOSFET) or bad power amp....
Chosen Solution After I connected them to the charger and held it for 10 seconds like the Beats website says they still won’t turn on. It could be that I’ve worn them in humidity I have no idea, them not turning on has happened before and it was a simple fix of keeping them inside a while but I’ve done that and they still won’t do it. On top of that they charge, and reset....
Chosen Solution I’ve got a 85W Magsafe 2 power adapter (Model A1424). The other day it just suddenly stopped charging. No LED on the tip, and no charge indicator on my MBP. I cracked it open, because I’ve got nothing to lose and $100 to potentially save.(discharged caps of course) I’m hoping for something simple like a blown fuse or something, but I didn’t see any skid marks or obvious failures on first inspection....
Chosen Solution 2 days ago I left my iPad closed on my bed I left for I think 20 minutes, I come back to open it up and my heart drops… I sort of small crack next to the home button. (I just got it replaced right before summer started) and now this happens? Since the replacement, I’ve been treating it like a baby and now it cracks all of a sudden?...
Chosen Solution I have a craftsman 917.289272 made by husqvarna. I first replaced the drive belt but it happened with the new one. Both times it happened when I had a trailer hooked up and had the parking brake on so I could dismount from the mower while it was still running. When I released the parking brake the belt jumps off and lodges underneath the pulley. @dix , Tom, I recommend inspecting the belt first for correct size and routing....
Chosen Solution So basically windows updates and my laptop didn’t take it well, I’ve gone through and I tried to fix it, but when I thought I got it to work, it shut off. ever since then, every time I try to turn on my laptop, it’ll flash to the Lenovo screen for a few seconds before turning off and then turning on to flash to that screen again. I’ve taken out the battery and tried to run it on just the power cord, and I’ve taken out the RAM to no avail....
Chosen Solution Ipod was on when I connected it to sync it. It shut down and now will not respond at all. Well there could be a few problems. Your phones battery could be dead if the battery is dead it wouldn’t connect to any computer as it wouldn’t be getting a charge to do anything with. That seems more like the problem in my opinion. Your charging port could be broken also which would say why it isn’t connecting....
