Chosen Solution why does it begin agitating on fill, and agitates fast on on settings? This is either the water level auto sensing switch, a clogged water level tube or a timer issue. My bet is on the switch. Please give us your exact model number so i can get you to the correct part.
Chosen Solution Hi everyone, I’ve just recently bought an Alcatel 3C phone and every time it connects to internet it just restarts continuously. So I never get past the homepage. I had a moto phone (powered by Android as well) that did the same thing when it would be connected to internet. Does anyone know how to fix this? Thanks Let’s see if the problem is isolated to one WiFi network....
Chosen Solution My phone only rings one time. I cannot answer fast enough so always have to call back the caller. How do I extend the number of ring? I have a Blu Bold Android. @airdrie ,Joy, I do not own this phone. my guess is you will have to change the amount of rings in your device’s setup, probably in sound and notifications. If not call your carrier/provider as they may be able to do it or instruct....
Chosen Solution And how can I fix it? Thanks! I only do PS4s, but when I turn a PS4 on and it immediately signals that it is overheating, it is because the APU clamp is loose or missing.
Chosen Solution Everytime I charge my phone it turns itself off. I have to unplug the charger and take out the battery to get it to turn back on does anyone know why this is happening and how do I fix this. Can you take a picture of the charger port? Otherwise check the charger port for any dust blockage inside. Does the charger cable go in firmly? If there is lint and etc stuck in the charger port you can use a toothpick to get some of it out....
Chosen Solution My tablet is completely unresponsive to my touch. When I try to open an app, or navigate to the apps screen, nothing happens. Your device could be malfunctioning. Restart the device and see if it works. If it still does not work, you can try to replace the screen. Refer to our screen replacement guide. Yes I have tried it never work,I hope I need replacement
Chosen Solution When my ABS system is connected and my abs fuse is in I can’t go over 5 mph without it locking up, my abs light is on with a wrench symbol. What would cause this? If I disconnect the abs and take the fuse out the vehicle drives fine. This just happened on my 2006 Ford Explorer 4.0 4x4. My abs, traction control, and wrench lights came on. I stopped but when I tried to drive the 4x4 light came on and the brakes were engaged by themselves....
Chosen Solution Hi, I have a Breville BES870 espresso machine purchased in Australia. I have been back in the UK 18 months and it has been working perfectly up until a couple of weeks ago. I started to get no steam, then no water coming through and finally the machine was tripping the fuse box. Can you advise where I could get this repaired? Many thanks David Warren Dawarren1972@yahoo.co.uk @Pamela Lincoln , Hopefully you didn’t pay for the service as the problem was not fixed....
Chosen Solution The light of my controller is blink a lot and it is not connecting Replace the battery. IF it still does not work, makesure you don’t have any other quest 2 headsets that is could pair with. Also, checkif your Quest isshowing the controllers as conected
Chosen Solution I have a 2003 Nissan Murano, my front wipers not working @jgober0 this is a tough one. There are two things to do 1) check fuses, and 2) perform an “Auto Active Test”. Apparently there are at least 7 fuses that can affect the wiper function. I suggest you check all of the fuses until you find a blown one. Okay here is the weirdest test you can do....
Chosen Solution I have just pulled a iphone 5c out of a old drawer and first, I attached the display loosely (not clipped in) and I got the phone to boot up. The touch was unresponsive but i thought that was because of the bad panel. After a few days just before ordering a replacement display, i tried the same test but it doesn’t register in finder on mac or make any noises while being plugged in to charge....
Chosen Solution my laptop keeps on displaying “calculating” then ”not charging” when i remove the charger the laptop switches off. could the problem be the battery or the charger The charger is fine as it’s allowing the laptop to power off the wall charger. Try a replacement battery and see how it goes. Worst case scenario would be the battery charging circuit that has gone bad but that is unlikely.
Chosen Solution My son dropped my phone in the toilet. It was in there around 10-15 seconds. I immediately dried it out the best I could with a paper towel, then took out the SIM card slot and placed it in rice for around 24 hours. I hen started using it, and after that it worked just fine, except the Touch ID. The next day the Touch ID started working and I turned it on....
Chosen Solution I only had this phone for 5 days and the day I brought it home, it quit working through making or receiving calls, it’s a very annoying issue and I am beyond frustrated with trying to figure it out, the person I speak to can hear me but I cannot hear them and the only way I can hear someone is thru speakerphone. How can I fix this issue without having to pay more money or having to replace the phone, any help would be appreciated thanx :)...
Chosen Solution I was replacing my digitalizer sssembeld it the. It didn’t work Samtheman1 did you have that line before you tried to replace the digitizer? did you replace the digizer? What was wrong with the original? It depends what this red line looks like. It could be that the ribbon cable is not properly inserted, that it is ripped or otherwise damaged, or that the LCD got damaged. We would need to see more of this Adding images to an existing question
Chosen Solution my old iPhone 5 its old and I’m not used long time so i want know how to fixed this iPhone You will need a new battery. The charge on lithium ion packs if dropped to below a certain threshold will not charge and thus the phone will not turn on.
Chosen Solution My phone get ON HOLD during call in progress. Also get Mute Which version of MIUI are you using ? MiUI is the ROM based on Android Lolipop. When you put your phone beside your face it touches the buttons. If it touch hold then phone gets put on hold etc. enable pocket mode to disable touch screen if you put it on your face.
Chosen Solution I recently took my entire Macbook pro early 2008 completely apart to see how everything ran and decided that I wanted to upgrade a couple of things. So far, I upgraded the ram which does work, however I upgraded the original hard drive on the computer to a 2.5’“ Sata 6 Gb/s SSD which hasn’t gone over very well. I transferred over all my files cloning the original drive and putting it onto the SSD, but during startup I get the prohibitory sign....
Chosen Solution I need a battery for my insta-share projector. Where can I find parts for motomods? https://shop.motorolasolutions.com/porta… That is the part store for batteries for them. I would check there.
Chosen Solution I need more information than is in the instruction manual that came with my camera. I want it in print form and I don’t want to print 278 pages. Has anyone used a company that does this for you.? Here’s one for the non-V model: https://www.google.com/search?q=Sony+cyb… If you have a phone I suggest you just download it to you tablet: https://www.google.com/url?sa=t&source=w… Hope this helps!
