Chosen Solution I recently bought a Iphone 5s as an emergency phone. It worked fine for a couple of weeks but now it seems to be going haywire. It auto touches and opens random apps. Is it a ghost touch issue and how do I fix it??? @althafajmal replace the display assembly since this may very well be caused by the current digitizer on your current assembly. iPhone 5s Screen Replacement
Chosen Solution my phone shows charging notification when connected to a charger but the batery runs out and the phone turns off. i have replaced the battery but the problem is still there. Hi! Have you tried using another charging cable and/ or power brick? The charging port on the motherboard needs to be replaced
Chosen Solution My laptop is fully charged but when i turn it on the screen light goes on but the screen is completely off and then after turning it on about a minute after it makes a (beep beep) noise an turns off. Could this mean my whole laptop is done?? Hi there, Hopefully this website will help: http://www.computerhope.com/beep.htm Good luck, Eric
Chosen Solution How can I fix my tv I’ve tried to unpack.ug it but it’s on a wall I’ve tried to tune it on and for like 1 milisecond it turned to just Sony the no picture blank screen and constantly flashing red 6 times I just need it fix asap thanks Deanna Warr we need to know your exact model. For the Sony Bravia a 6 blink error code is usually related to a backlight issue....
Chosen Solution I replaced my ignition cylinder but when I go to start it it runs for a sec and dies It would help to post a video of the truck starting. Is the gas old?has the truck been flooded? without more information (even the model year) this sounds like the carburetor I would need more information about the truck and the issue.
Chosen Solution when i open camera i can take pic but ic ant say i think screen is brake When you switch ON, does the lens move ? Any strange noise ? Is the lens Open ? Is the eye-lid open ? I’m asking to determine electronic problem or mechanical problem. Please respond.
Chosen Solution The volume control is showing on the left side of my laptop screen and I can’t get it to go off. Nor can I adjust the volume control. I’ve tried rebooting but that didn’t work. Any thoughts? Thanks. I would go a head and perform a factory default recovery and see where it takes me. Try that and keep us updated!
Chosen Solution I have tried charging my device several times, but when it is not plugged in it will not turn on. Everything works when it is plugged into my computer. How do I fix it? There could be several reasons for this. The most likely cause could be a bad battery. Here is page that may be able to better answer your question.
Chosen Solution Crack screen for asus e510 I can’t find the part info online, so you may need to take the laptop apart to get a screen part number for the screen. With yours, it looks like you need to remove the bezel and then unscrew the screen to get the part number. Refer to this video to disconnect the battery, and then remove the old display to see what you need....
Chosen Solution What type of solder would I need to repair a very worn contact on the board of this phone? im new to soldering and not sure for this old type mobile which solder I would need to perform a repair? the fault is that the volume won’t work and the board contact is very worn out it needs re-soldered I guess to get it working! please help ☺️...
Chosen Solution I replaced the screen/digitizer combo and moved over the original home button. Put everything back together, did multiple restores, and DFU restore and I still cannot delete apps. The little x in the corner comes up but pressing it does nothing. Also when installing new apps they stall or do not even show up on the homescreeen after they’ve been installed. App store shows “open” but clicking it does nothing....
Chosen Solution My computer goes to the gateway screen then a black screen that says a disk read error has occurred press ctrl alt del to restart. But when I press ctrl alt del it does the same thing and there is no disk HI: The computer is telling you your hard drives has a problem. On booting the computer has many files to read to bring the computer to run....
Chosen Solution My macbook keeps restarting randomly, sometimes when it’s asleep. It stopped working recently and had to have the motherboard replaced but it still keeps restarting. I have tried everything including a full wipe and reset. It stopped restarting for awhile but now it’s doing it again. Here’s what the report says: panic(cpu 0 caller 0xffffff7f8e54e970): “UPSB(MacBookPro13,3): thunderbolt power on failed 0xffffffff\n”@/BuildRoot/Library/Caches/com.apple.xbs/Sources/IOPCIFamily/IOPCIFamily-370.0.2/IOPCIBridge.cpp:1396 Backtrace (CPU 0), Frame : Return Address...
Chosen Solution Recently the car was having issues starting, we changed the battery and now it starts but it takes a long time of holding the key in the ignition position. What could be the problem here?I f its any help, the car has had other electrical issues regarding the speakers and computer. I’d take it to an AutoZone and get a free computer read out to help determine what the problems are....
Chosen Solution Hi. If your machine is constantly jamming, the problem could be that you have broken stripper plates. These are the plastic (or sometimes metal) plates that sit between the cutters and make the paper fall into the bin. If they are broken or snapped off the paper can just constantly go around the cutters until it Jams. If you have any questions or would like any more help please visit www....
Chosen Solution It seems that my mode dial on the left-hand side my Olympus OM-D EM-10 isn’t working. It’s concerning as I am unable to put the camera into video mode or the other functions available, as it is stuck on Manual mode even when I turn the dials to another setting. Anyone have suggestions as to what the problem is and how I could go about fixing it? I also had the same problem TWICE....
Chosen Solution I replaced the battery and it turned on and worked well but still wouldn’t charge. Then I replaced the mag connector and it still has the dim light problem. I replaced the battery a week ago so it probably is dead and can’t even see if it turns on. What is my next move here? Ouch! The charging logic on the main logic board needs repair. This tends to be beyond most people to handle....
Chosen Solution My display is not working but my touch screen is working. And sometimes my display turns on but after sometime display goes black again Just factory reset the device and that can help if that doesn’t fix it then replace the display
Chosen Solution hello, today i got back from school and my iPod was very hot. i unplug it and give it some time to cool down and after an hour it was all cooled. i noticed that the iPod was not turning on so i go to plug it in and i thought i heard a “skreeeeeeeee” like a high pitch noise coming from the iPod. i put my ear close and it was coming from the top left corner and the iPod started to get hotter....
Chosen Solution Panasonic Over The Range Microwave Oven Model NN-P295 shuts down immediately no matter what program is selected. It started doing this after the exhaust door at the top was pushed closed while it was running. I will try to add pictures showing the door st the top of the microwave. There is a switch located behind that vent. There is a possibility that by forcing it shut you threw the shaft that opens and closes the vent out of allignment with that switch....
