Posts

Chosen Solution My system keeps shutting down when I turn up volume. Lights randomly flash but won’t play unless I unplug & plug back then shuts off again when I turn up If you are experiencing problems with your AVH Pioneer car stereo and it keeps shutting off, it could either be related to overheating or a wiring issue. If the car stereo internals overheat, the car stereo will automatically turn itself off to prevent it get damaged....

Chosen Solution I have a Mac Mini 2010 running Snow Leopard and installed all updates. I erased the drive and installed a fresh copy of SL including Rosetta and QT 7 then installed all updates. After the computer boots to the login screen it halts or hangs for 5 minutes. The mouse works but I can’t use the keyboard to enter a UN and PWD. The cursor just sits and blinks at the UN....

Chosen Solution what causes oil to back up into the fuel filter bowl? Sounds like an injector issue. Here’s the forum on the issue: https://www.ford-trucks.com/forums/10209… It’s a 7.3L correct? I’ve seen many times and you need to replace ur fuel injector o’ rings. The injectors have separate sections that get fuel pressure or high pressure oil. Those sections are sealed from each other to the cyl head where the galleys are for the fuel pressure to travel and high pressure oil to travel as well....

Chosen Solution Whirlpool ED5PHEXNT00 is not freezing at all, light are on, but thing are barely cool, not even cold. I run some multitestor test on the compressor, capacitor. They seems to be fine. But fridge is still not working properly Update (05/18/2021) I check the evaporator coil, it’s not even cool. There is no oil residue, so I assume no leakage from the compressor. The compressor fan and evaporator fan are both running fine....

Chosen Solution I have whirlpool MOD#ED5FVGWXS06 freezer and fridge are not cooling I need help pls Hi, Can you hear if the compressor motor is running? If not it may be a faulty capacitor (supplier example only to show location of part and possible cost). If it is determined that it is the problem search online for WPW10662129 to find other suppliers that may suit you better. If the compressor is running it may be a thermostat problem....

Chosen Solution The whole keypad, touchpad and two click pads are not responding. Machine works perfectly with usb mouse and plugin usb keyboard. This happened to me several years ago. Perhaps while trying to use a “Fn” key to change the volume on my laptop, I disabled my touchpad by pressing the wrong button. For weeks I didn’t know what the issue was, which wasn’t helped by the touchpad function icon on my keyboard looking just like a monitor icon, and it took me a while to realise that maybe it was in fact a touchpad icon....

Chosen Solution I Installed one of your new SSD 1 Terabyte hard drives in my 2009 MacBook Pro and I’m getting flashing question mark when trying to start up. This happens weather I start holding the “command “ and “R” keys or just trying to start up normally. I also replaced the hard drive Data cable and still the same issue. So I’m thinking you guys sold me a defective hard drive....

Chosen Solution Today I committed one of the worst offences to my Mac: I spilt coffee all over the keyboard. Thankfully it was still functioning. I cleaned it up and immediately shut it down. I vacuumed the keys and left it sitting upside down to dry out. It seems to function smoothly minus a couple of problems. Firstly, I can’t power it on via the power button. Instead, I close and open the lid which turns it on by itself....

Chosen Solution When the heat is on in the truck, it only blows from the vents on the dash. It does not come out of the floor vents or the defroster. How do I fix this? There are electronic motors that control doors within the dash. The gears inside the actuators are plastic and over time they wear out, break or the motor goes out. Depending on if you have dual controls, one for driver and passenger you may have more of these acctuator motors....

Chosen Solution Flash won’t fire when I press the button. I was taking photos at night, it was dark, and the flash did not work. Pictures are no good. What can I do? To eliminate the simplest possibilities first, I would: Make sure that your camera is in Auto mode and not Manual Make sure you have lifted the flash out of the camera before shooting Check your flash settings and make sure your flash is not turned off (you must lift the flash out of the camera in order to access the flash settings) While The Camera Should Fire the Flash When In Auto Mode, There Is a “No Flash” setting available on the top of the camera....

Chosen Solution I have Brother DCP-J4120DW after some time (after I bought printer) I get the error message “Ink Absorber pad is full”. I bought new absorber box but after install the printer still showing terror. WHY??? WHAT TO DO NOW??? i found this article. It isn´t for the DCP-J4120DW it could help. http://fix-your-printer.blogspot.com.es/…

Chosen Solution I have. Whirlpool Gold Quiet Partner 3 Model # GU2400XTPQ7 Age unknown for sure Ran a regular cycle like always last night, this evening when I come home the display is reading 1H and blinking every once and a while. When I tell it to cancel, it starts running a two minute cycle but doesn’t sound like it’s producing any water. I ran a regular cycle to try to clear it....

Chosen Solution I recently did a battery replacement and all of a sudden my phones earpiece stopped working. I switched the earpiece from a working phone and it still doesn’t work Check the cable coming from the front camera, is there any visible tears on the cable? Try pressing the volume up and down button. Does it say headphones or ringer when adjusting it and do you also see the volume bar at the bottom of the volume adjustment popup too?...

Chosen Solution My iphone 7 stopped being able to charge after an iphone charging cable broke off. I replaced the lightening port and now the phone cycles on and off just showing the apple logo. Could you have damaged the battery at all? Replacing the charge port shouldn’t make it boot loop

Chosen Solution Some keys don’t work when I try to type. First try to clean up the keyboard, and if it does not work visit our Troubleshooting page for the keyboard repair guide. First try to clean up the keyboard and if it still not working visit our troubleshooting page for a repair guide.

Chosen Solution it switched off by itself and never came up after that.. Look at the power cord and make sure that the laptop has power. Sometimes the device dies and either the lightning panel was damage or the battery was damaged. Look upon that and if it turns on and does not show anything on the screen try plugging to the HDMI to another device in case it is just the screen....

Chosen Solution I have a MacBook (13-inch, Aluminum, Late 2008) I got the battery replaced around 1month ago and when you click on the percentage the battery condition shows service battery, it only has 29 cycles. Anyone know why the condition is so poor even though the battery was replaced recently and has a low number of cycles. This is the battery information from the system report. Battery Information: Model Information: Serial Number: Manufacturer: DP Device Name: bq20z95 Pack Lot Code: 0 PCB Lot Code: 0 Firmware Version: 0 Hardware Revision: 0 Cell Revision: 0 Charge Information: Charge Remaining (mAh): 409 Fully Charged: No Charging: Yes Full Charge Capacity (mAh): 1441 Health Information: Cycle Count: 29 Condition: Service Battery Battery Installed: Yes Amperage (mA): 767 Voltage (mV): 12082...

Chosen Solution My storage ran out and I can’t get SD card out. I think the spring is broken. Please Help. sadly the only solution if the spring is broken and you cant open it is to use a tweezers and try to get it out

Chosen Solution I just installed upgraded RAM in a family member’s MacBook. At the same time, I installed a new SSD and was starting up with an install DVD from the optical drive. I received the 3 tones repeatedly. Tried reseating the modules, checking to make sure that I had the correct modules, reinstalled the old modules and have the same 3 tone result. Weird! I tried the individual slots, one module at a time with the same result....

Chosen Solution The speaker was replaced but its still not working. I can’t hear any sound coming from them. make sure new speaker is attached correctly and that the device is not muted.