Posts

Chosen Solution I went to unbox my drone to show someone the lights and sounds the display makes but the battery must have been dead cause nothing happened. Then when I plugged it in to charge it starts flashing a playing less than a second of sound and constantly doing that but won’t act normally as it always did. Any help? Thanks since you left the batteries in it you may have acid powder that got on the wires....

Chosen Solution we have has recent problems with the screen failing to react to keyboard strokes, and have had to turn off and restart the Elitebook unit hp elite book folio 1040 Hello, Sometimes you can solve the problem by update the BIOS and the graphical driver using HP website. :)

Chosen Solution On my 24 inch Cinema Display why is there a white mark that appears to be condensation always appearing on my screen? The outer glass is attached to the display with magnets and is not “sealed”, I suppose with the right atmospheric conditions you could experience condensation. If you find out let me know my Visio has gotten worse looks like drips on the inside of the screen ,it has never been wet....

Chosen Solution Until recently, I’ve still been able to use my MBP for designing and browsing. One day, I opened it and it was stuck on the login page. Can’t click the field to enter my password. That’s problem #1. When I do a forced restart, it now ends up with a black screen. It doesn’t light up with the apple logo etc. This is problem #2. I know it isn’t a broken LCD because when I rest my computer for hours or so, it will boot up again and back to problem #1....

Chosen Solution Im confused, I recently bought a 32 GB iPod touch and theres no info in the package indicating which generation it is. How can I tell? This page will help you figure out what iPod you have. CHeck the model in settings.. i have a 3rd gen 32gb and i have..MC008C Hope it helps..

Chosen Solution I need your guy’s help. I’m planning on replacing my display on my MacBook Pro, but I don’t know which screwdriver set to buy. I’ve been looking around and can’t really find the right sets with the right bits. Do you guys know which screwdriver set to use? Here’s the guide on how to do it MacBook Pro 13" Function Keys 2017 Display Assembly Replacement This tool kit has all of the needed bits Mako Driver Kit - 64 Precision Bits The explicit bits needed: Pentalobe P2 & P5Torx T3 & T5 & T8

Chosen Solution My Nikon D5500 (after approximately 750,000 exposures) has begun protesting its photographic regimen by merely making a high pitched whirring noise when the shutter release is pressed down. (No photos either…) The first time it did this, I took off the lens to look inside, and managed to get the shutter assembly (mirror assembly?) to come unstuck. Took a couple more pictures, but then the mirror (and whatever else inside the camera) doesn’t seem to come unstuck now....

Chosen Solution When I insert any DVD, after the charging time, BAD DISC shown on the TV screen Hi @sevenofnine , Have you tried another disc, in case this one is scratched or faulty? If you have and it still doesn’t recognize the disc try cleaning the laser lens in the player. Here is a link to the ifixit CyberHome CH-DVD 300 Disc Tray Bracket Replacement guide, which will help gain access to the laser lens....

Chosen Solution Why does the audio coming out of the computer sound distorted? If the audio sound is distorted while listening through the laptop’s speakers, the audio driver may be the problem. This will require you to update the driver for the sound card in the laptop. Using this website, http://support.toshiba.com/drivers, you can search Toshiba Portege and all relevant drivers will show up.

Chosen Solution Not getting power to fuel pump 2005 Ford explorer xlt. Battery,Fuses,fuse box relay, Emergency shut off fuse,fuel pump drivers module,fuse for fuel pump,fuel filter, fuel pump and crank sensor all have been replaced and still I am have no power to the fuel pump at all. Hi, I found this when I was browsing around a bit for some info. I would start by checking the fuse in the fuse panel under the dash, and look for if the fuse F9 is intact (2A)...

Chosen Solution I tried everything I can but the phone won’t turn on, not even if I am changing it. You could try to change the battery since there is a high chance that it is juiced out. You also might want to do a check of the charging cable you are using, if it is working fine or not It wont open for 2 months so i still cant use any phone right now im using my computer plz help maybe i because my cousin borrowed my adoptor t5hen i found a soccet that could fin in the charger mine maybe ruined the battery or what …....

Chosen Solution i dropped my phone about a week ago and since then the back camera and flashlight are not working. Also, there is a little yellow triangle over the flash icon, saying its too hot and needs to cool down. What should I do? Take it in and have it fixed at Apple for lots a bucks or is there something else i should try first?? Definitely I would look into replacing the camera....

Chosen Solution My controller is not connecting to the Xbox despite holding the home button. If your Xbox One Wireless Controller is not syncing or connecting to your Xbox console, see the Xbox One Wireless Controller Won’t Connect to Console problem page for possible causes and solutions. There are several reasons your controller might not be connecting to your Xbox One. Usually, the controller won’t connect if the batteries are low or completely drained....

Chosen Solution When I turn on my phone (not unlock it) it vibrates a short vibrate and become slower for a few seconds. Same thing happens when I restart it. It checks for S pen every time you restart your phone it vibrates to check for s pen It does that as a boot up feedback haptic. Most Samsung devices do it. It’s just letting the user know it’s powering on, it’s nothing that can be disabled as far as I know....

Chosen Solution My Whirpool washing machine is not draining completely. When the cycle finishes my clothes are still wet and there’s some water still left in the tumbler. I’m assuming that something is plugged up besides the pump because I already checked there and its clear. Need to know where else to look for foreign objects falling into. Thank you. I replaced the clutch to fix this problem.

Chosen Solution Yesterday, I was browsing the web and performing daily tasks on my laptop.I noticed in both occasions of normal use my laptop was not running as smoothly as it used to. The payload on your Chrome Book is what is causing it to stagger. How much RAM is being used and why? That would be where I’d start. Unnecessary tabs and apps left open running a constant connection check doesn’t help either....

Chosen Solution Why is my tablet keep freezing? Most likely your NABI XD is not opperation on the latest software. If your screen is frozen you should perform a “Factory Reset” that can be found here -> NABI XD Troubleshooting

Chosen Solution I have a 2003 elantra and have recently had issues with it. Over the course of the past few months, it has stuttered and slowed to a stop while I was driving and then not started for a few minutes following the incident Without fail, if I wait 5-10 minutes and try to start my car again, it will turn on. Today, it escalated. After driving over 250 miles, my steering wheel locked and my car started to slow then die....

Chosen Solution Even touch id does not work This could be the cause of a damaged home button and/or damaged screen. The connection runs through the screen for the home button which is usually the cause of Touch ID not functioning. The actual home button itself not functioning suggests that it may need to be replaced. However, in replacement of home buttons for iPhones you may run into the Touch ID not being functional even after replacement due to them needed to be paired to each logic board individually....

Chosen Solution Since I installed the last Yosemite update (Version 10.10.5), my iMac will not fully boot up! When it starts, the boot screen (Apple logo) and a progress bar appears. The progress bar fills up until its about 2/3 full then nothing happens. I have let it sit for days to see if it will finish booting and nothing happens. I have also tried the boot-up shortcut keys and nothing happens....