Chosen Solution
I have a water distiller plugged into an extension cord. It uses a 3 pin/3 prong cord. I used to have it plugged into a smaller gauge extension cord until I noticed a plastic burn smell, so I bought a large gauge extension cable which seemed to have resolved the issue. Now it seems that it has melted where the two cables connect! I understand that there is resistance there causing non-conductive material to become conductive, but how can I know if the issue is because of the machine, because of the cable or because of the power coming from the outlet. Thank you for your help community! -Izz Update (02/24/2019)
Back panel of the water distiller: http://starsound-kontinuum.com/wp-conten…
Cable provided with machine: http://starsound-kontinuum.com/wp-conten…
Burnt extension cord:http://starsound-kontinuum.com/wp-conten…
Here’s how to select an extension cord. 15 Amps is a very heavy load. Choosing a Safe Electrical Extension Cord https://www.thespruce.com/select-proper-…
There is a big difference between line cords and in the wall wiring! Cords use stranded wire where flex is important but they don’t handle high current loads over 4~5 ft. In the wall wiring is solid core wire which can offer the current, it’s not flexible!
Your device is using to much current for the extension and the inter-connection! You need to get an electrician in to place a proper outlet near your water distiller device. The shorter the line cord the better and no extensions!
