Chosen Solution
Starts and runs fine, just when I take off the kickstand, and put weight on the seat it just dies
@theshadows sounds like either a torque issue or you are cutting something off under the seat. Check first to ensure that the fuel line is not being ‘pinched’ or that it pulls on some wires. If it idles okay but does not have any torque you do want to check the compression and see if your engine performs as it should. I’d also would try to adjust the carb. You want to start with the air/fuel mixture screw first. Also check your float height and make sure that the level is right and that the needle valve is not stuck.
I found out.that my ht lead was split.everytime i sat on the bike it was shorting out the spark when it touched the top of the
Did you check your battery connections. Sounds like your issue might be an issue. From my understanding, you do need a good battery connection for the bike to run.
you cvt is messed up. if it dies when you stop and then it’s hard to push, your cvt has something wrong with it. clutch is stuck or something in there.
